With a thermal printer and combined power supply, it is used for electro-pulse therapy of cardiac arrhythmias. Defibrillator-monitor DKI-N-10 "Axion" is used in medical hospitals, cardiological dispensaries, to equip ambulance and emergency medical teams.
Completion on request.
Description of the DKI-N-10 "Axion" defibrillator-monitor
- Defibrillator consists of two parts: wearable part - weight 6 kg and charger - weight 2 kg
- Defibrillation impulse - bipolar trapezoidal with limited duration (BTOD), asymmetric with a ratio of amplitudes of currents of negative and positive half-waves (0.5 ± 0.1) at a load of 50 Ohm
- Possibility of use for adults and children
- Speech accompaniment of the operator's actions and the process of the device operation
- Automatic reset of the accumulated energy to the internal load 30 seconds after the set
- Possibility of receiving and registering ECG
- Built-in thermal printer - width not less than 57 mm
- The time of continuous operation of the device in the monitoring mode - at least 7 hours from replaceable rechargeable batteries (2 pcs.), When operating from a 220 V network, from the vehicle's on-board network (12-30 V) - at least 168 hours
- Ability to charge two batteries simultaneously
- Display of all information on the LCD display before and after defibrillation
- Cardiosynchronized
- Manual control
- Parameters: Length 380 mm, width 175 mm, height 270 mm
- Screen dimensions, 115 × 86 mm
- Energy gain time 200 J, no more than 6 s
- Energy gain time 360 J, no more than 10 s
- The number of energy discharges 360 J from a fully charged battery, not less than 40
- Sensitivity of the ECG channel, 5, 10, 20 mm / mV
- Image movement speed, 12.5, 25 mm / s
- Pulse energy, 5, 10, 25, 50, 75, 100, 150, 200, 250, 300, 360 J
- Power consumption, no more than 250 W
- Electrical safety class II, type BF